Hitachi CP-WU8450 User Manual

103
Presentation tools
Connect the Hitachi Pen tablet or USB mouse to the USB TYPE A port on the
projector.
To save an image that has been drawn, a USB storage device must also be
connected to a USB TYPE A port of the projector.
If the projector only has one availabe USB TYPE A port, use a USB hub to
connect both devices.
In order to use the simple mouse function, connect the USB TYPE B port of the
projector with a USB (A) port of the computer with a USB cable.
Connecting the Devices
• Some USB storage devices and/or USB hubs may not operate properly.
• Before removing the USB storage device from the port of the projector, be
sure to use the REMOVE USB function on the Thumbnail screen to secure your
data (
95). If you do not run the REMOVE USB function and remove the USB
storage device, the time stamp may not be recorded correctly.
USB storage device
Example of connections
NOTE
Hitachi
Pen tablet
USB mouse
USB hub
USB cable
Drawing function (continued)

Hitachi CP-WU8450 Specifications

General

Matrix size	0.76 \
Matrix type	3-panel (p-Si TFT active)
Native aspect ratio	16:10
Projection distance	1 - 38.3 m
Projection technology	LCD
Contrast ratio (typical)	3000:1
Screen size compatibility	30 - 600 \
Projector native resolution	WUXGA (1920x1200)
Audio input	3
RS-232 ports	1
Zoom capability	Yes
Focal length range	- mm
Lamp type	UHP
Lamp power	330 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	- h
3D	-
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
RMS rated power	16 W
Number of built-in speakers	2
DVI port	No
BNC input ports	5
USB connector type	USB Type-A, USB Type-B
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Noise level	- dB
Certification	UL/cUL, FCC Part15 class A, AS/NZS CISPR22 class A, CE, GOST-R
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
Power consumption (standby)	- W
Operating temperature (T-T)	0 - 45 °C
Sustainability certificates	RoHS

Weight and Dimensions

Depth	396 mm
Width	498 mm
Height	135 mm
Weight	8700 g