24
Multifunctional settings
Multifunctional settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN,
OPTION, and EASY MENU. EASY MENU consists of functions often used, and the
RWKHUPHQXVDUHFODVVL¿HGLQWRHDFKSXUSRVH(DFKRIWKHVHPHQXVLVRSHUDWHGXVLQJ
the same methods. The basic operations of these menus are as follows.
1.
Press the MENU button on the remote control or one of
the cursor buttons on the projector.
The Advanced MENU or EASY MENU will appear.
In the EASY MENU
2.
If you want to change it to the Advanced MENU, select the
"Go to Advanced Menu"
3.
8VHWKHFXUVRUEXWWRQVŸźWRVHOHFWDQLWHPWRRSHUDWH
4.
8VHWKHFXUVRUEXWWRQVŻŹWRRSHUDWHWKHLWHP
In the Advanced MENU
2.
8VHWKHFXUVRUEXWWRQVŸźWRVHOHFWDPHQX
If you want to change it to the EASY MENU, select the
EASY MENU.
7KHQSUHVVWKHFXUVRUEXWWRQŹRQWKHSURMHFWRURUUHPRWH
control, or the ENTER button on the remote control to select
an item. The display of the selected menu will be active.
3.
8VHWKHFXUVRUEXWWRQVŸźWRVHOHFWDQLWHPWRRSHUDWH
Then press the cursor button
Ź
on the projector or remote control, or the ENTER button
on the remote control to progress. The operation menu of the selected item will appear.
4.
8VHWKHFXUVRUEXWWRQVŸźWRRSHUDWHWKHLWHP
Ɣ
When you want to reset the operation, press the RESET button on the remote control
during the operation. Note that items whose functions are performed simultaneously
with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.
Ɣ
In the advanced menu, when you want to return to the previous display, press the cursor
button
Ż
on the projector or remote control, or the ESC button on the remote control.
5.
Press the MENU button on the remote control again to close the menu
and complete this operation. Even if you don't do anything, the dialog will
automatically disappear after about 10 seconds.
Ɣ6RPHIXQFWLRQVFDQQRWEHSHUIRUPHGZKHQDFHUWDLQLQSXWSRUWLVVHOHFWHGRU
when a certain input signal is displayed.
To Next Page
Loading...
Need help?
General
