Hitachi CP-X5021N - Confirmation of Main & Sub Setting

14
Installation
2.4 Conrmation of Main & Sub setting
NOTE • In use of Intellectual Stack, the remote control signal can be
received by the Main only, and the Sub ignores the remote control signal.
2. The MENU dialogs appear on the lower right of screen.
Main (Set B)
Sub (Set A)
3. If you press the ► button, the dialog is closed and a menu on Main (Set B)
will appear when MAIN is pointed at.
If you press the ◄ button, the dialog is closed and a menu will disappear.
NOTE • If these dialogs are not displayed on screen, check RS-232C cable
connection (

11 ) and Main/Sub setting on STACK MODE dialog. (

18 )
1. Press MENU button on the remote control to Main (Set B).