Hitachi CP-X5021N - 3.2 Selecting Main, Sub or off

18
Setting on Stack menu
NOTE
• After setting Main or Sub, the setting
information can be monitored on Web Control.
(

Network Guide → Web Control) Select
Projector Status on the main menu of web
control. Stack Mode item shows whether your
projector is set to Main or Sub, even though
STACK MODE is set to OFF.
3. Press the ◄ button to turn back to previous menu, or the ► button to com-
plete the setting. ( 23 )
3.2 Selecting Main, Sub or off
If you wish to turn on Intellectual Stack, select either MAIN or SUB. When a
projector is set to MAIN and the other is set to SUB in STACK MODE dialog, Intel-
lectual Stack is started. If you wish to turn off Intellectual Stack, select OFF.
1. Point at STACK MODE with the ▲/▼ buttons in
STACK menu, then press the ► button to display
STACK MODE dialog.
2. Use the ▲/▼ buttons in the dialog to point at MAIN, SUB or OFF.
OFF : for disabling Intellectual Stack
MAIN : for assigning the projector to Main that is works as a control tower.
SUB : for assigning the projector to Sub that works as a follower.