33
Setting for input port on menu
Setting on menu - Inputting image of Sub and Main individually (continued)
3.
Use the ▲/▼ buttons to point at SUB INPUT SOURCE, and press the ►
button to display SUB INPUT SOURCE dialog.
4.
Use the ▲/▼ buttons to point at FOLLOW MAIN
UNIT, and press the ► button to complete the
setting. (
23
)
5.
Press COMPUTER or VIDEO button on the
remote control or INPUT button on the control
panel on Main projector, MAIN INPUT SOURCE
dialog is displayed on screen. Use the ▲/▼
buttons to point at the source you connected a
cable to, and press the ► button to complete the
setting.
NOTE • When FOLLOW MAIN UNIT is selected, if you set input source on
whichever Main or Sub projector, the same input port is automatically set on
other projector.
• When FOLLOW MAIN UNIT is selected, LAN, USB TYPE A and USB TYPE
B cannot be selected.
• When FOLLOW MAIN UNIT is selected, if any buttons related to input port
setting, such as COMPUTER, VIDEO, MY SOURCE/DOC.CAMERA and MY
BUTTON (if any function related to input source is assigned) buttons on the
remote control, and INPUT button on the projector is pressed, the dialog to
select input source is displayed.
To Next Page
Loading...
