IMPORTANT - 1
IMPORTANT
Precautions on CE Conformity Marking
In consideration of use in the European countries, this instrument bears the
CE mark indicating the conformity to the requirements mentioned below.
(1) Electromagnetic Compatibility Requirement
This instrument is designed to satisfy the European Norm EN61326-1 (2013)
for the CE conformity marking through conformity to the EMC Directive
2004/108/EC.
This instrument is classified as Class A of EN61326-1 (2013). So, this
instrument must not be used in domestic establishments nor in
establishments directly connected to a low voltage power supply network
which supplies buildings used for domestic purpose.
And this instrument is also designed to comply with table 1 "Immunity test
requirements for equipment intended to be used in a basic electromagnetic
environment" in the above European Norms. If the instrument is used near
an intense electromagnetic source, however, interfering noise may be given
to the instrument to cause an adverse effect on its performance or
functionality.
(2) Safety Requirement
This instrument is also designed to satisfy the European Norm EN61010-1
(2010) for the CE conformity marking through conformity to the LVD Directive
2006/95/EC.
This instrument is requested to be used in a suitable environment and
grounded appropriately.
To Next Page
