Notes:
The mode is applied when downgr
ading microcode from a
version that supports pool reduction rate correction to a
version that does not support the function is disabled.
1097
This mode disables the warning LED to blink when specific
SIMs are reported.
Mode 1097 = ON:
When SIM=452XXX, 462XXX, 3077XY, 4100XX, or 410100
is reported, the warning LED does not blink.
Mode 1097 = OFF (default):
When SIM=452XXX, 462XXX, 3077XY, 4100XX, or 410100
is reported, the warning LED blinks.
Note:
The mode disables the warning LED to blink when specific
SIMs are reported.
Inactive
78 System option modes
Hitachi Virtual Storage Platform G400, G600 Hardware Reference Guide
To Next Page
Loading...
