HITACHI Deskstar & CinemaStar 7K1000.B & Deskstar E7K1000 Hard Disk Drive specification 
188 
When this counter reaches zero then all password protected commands are rejected until a hard reset or a 
power off. 
: Identifier (1-Mater, 0-User) 
Table 137    Security Unlock Information 
 
Zero indicates that device regards Password as User Password. One indicates that device 
regards Password as Master Password. 
The user can detect if the attempt to unlock the device has failed due to a mismatched password as this is the 
only reason that an abort error will be returned by the file AFTER the password information has been sent to the 
device. If an abort error is returned by the device BEFORE the password data has been sent to the file then 
another problem exists.