HITACHI Deskstar & CinemaStar 7K1000.B & Deskstar E7K1000 Hard Disk Drive specification 
210 
11.42.2  Device Attributes Data Structure 
The  following  defines  the  512  bytes  that  make  up  the  Attribute  Value  information.  This  data  structure  is 
accessed by the host in its entirety using the SMART Read Attribute Values subcommand. All multi-byte fields 
shown in these data structures are in byte ordering, namely that the least significant byte occupies the lowest 
numbered byte address location in the field. 
Data Structure Revision Number 
Off-line data collection status 
Self-test execution status 
Total time in seconds to complete off-line data collection activity     
Off-line data collection capability 
SMART device error logging capability 
Self-test failure check point 
Short self-test completion time in minutes         
Extended self-test completion time in minutes. If 0FFh, use bytes 177h and 178h for 
completion time. 
Extended self-test completion time in minutes. (word) 
Table 151    Device Attribute Data Structure 
 
11.42.2.1    Data Structure Revision Number 
The Data Structure Revision Number identifies which version of this data structure is implemented by the device. 
This revision number identifies both the Attribute Value and Attribute Threshold Data structures.