HITACHI Deskstar & CinemaStar 7K1000.B & Deskstar E7K1000 Hard Disk Drive specification
88
9.21.2.2 Data transfer
Once an SCT command has been issued, status can be checked and data can be transferred. Data transfer
uses log page E1h.
9.21.2.2.1 Read/Write SCT Data Using SMART
Command Block Output Registers
Number of sectors to be
transferred
Table 51 Input Registers of SCT Data Transfer Using SMART
9.21.2.2.2 Read/Write SCT Data Using Read/Write Log Ext
Command Block Output Registers
Table 52 Input Registers of SCT Data Transfer using Read/Write Log Ext
To Next Page
Loading...
