Hitachi L100 Series Quick Reference Guide

11
Restoring Factory Default Settings
Action Display Function/Parameter
Press , or as
needed.
b --
“B” Group selected
Press .
b 01
First “B” Group parame-
ter
Press/hold until...
b 85
Country code for
initialization selected
Press . If setting is
correct, then skip next step.
02
00 = Japan
01 = Europe
02 = United States
To change country code, press
or to set; to store.
Press .
b 85
Country code for
initialization selected
Press .
b 84
Initialization function
selected
Press .
00
0 = disable initialization,
clear trip history only
Press .
01
1 = enable initialization
Press .
b 84
Initialization now
enabled to restore all
defaults
Press/hold , , and
. Do not release yet.
b 84
First part of key sequence
Press/hold (STOP) for
3 seconds, then release.
d 00
Final part of special
sequence, “D_00” is
flashing
Now release the all keys
together, only after “D_00”
display begins blinking.
EU
USA
JP
Default parameter
country code shown
during initialization
Initialization is complete.
d 01
Function code for output
frequency monitor shown
FUNC.
1
2
FUNC.
1
FUNC.
1
2
STR
FUNC.
2
FUNC.
1
STR
FUNC.
1
2
STOP
RESET

Hitachi L100 Series Specifications

General

Brand	Hitachi
Model	L100 Series
Category	Inverter
Language	English