25
B084 Initialization mode (parameters or trip history)
• 00 Trip history clear
• 01 Parameter initialization
• 02 Trip history clear and parameter initializa-
tion
00
B085 Country code for initialization
• 00 Japan version • 01 Europe version
• 02 US version • 03 (reserved)
01 / 02 / 00
B086 Frequency scaling conversion factor 1.0
B087 STOP key enable
• 00 Enable • 01 Disable
00
B088 Restart mode after FRS
• 00 Restart from 0Hz
• 01 Restart from frequency detected from
actual speed of motor
00
B090 Dynamic braking usage ratio 00
B091 Stop mode selection 00
B092 Cooling fan control
• 00 Fan always ON
• 01 Fan ON during Run, OFF during Stop
00
B095 Dynamic braking control
•00Disable
• 01 Enable during RUN only
• 02 Enable always
00
B096 Dynamic braking activation level 360/
720
B098 • Thermistor for thermal protection control
•00Disable
• 01 Enable – PTC thermistor
• 02 Enable – NTC thermistor
00
B099 Thermal protection level setting 3000
B100 Free-setting V/f frequency (1) 0.
B101 Free-setting V/f voltage (1) 0.0
B102 Free-setting V/f frequency (2) 0.
B103 Free-setting V/f voltage (2) 0.0
B104 Free-setting V/f frequency (3) 0.
B105 Free-setting V/f voltage (3) 0.0
B106 Free-setting V/f frequency (4) 0.
B107 Free-setting V/f voltage (4) 0.0
Func.
Code
Name / Description
Default
Val ue
–FE2/–FU2/
–FR
Set
Val ue
To Next Page
Loading...
Need help?
General