Hitachi PSC-A64S - Pc-A1 Io; Safety Summary

8.3 PC-A1IO
8.3.1 Safety summary
CAUTION
• Do not connect voltage input to the control system before installation is correctly done.
• Read this manual carefully before performing installation work.
• Read this manual in order to congure the PC-A1IO
• This appliance must be used only by adult and capable people, having received the technical information or instructions to handle
properly and safely this appliance.
• Children should be supervised to ensure that they do not play with the appliance.
NOTE
Do not install PC-A1IO in places... :
• with vapour, oil or dispersed liquids.
• with heat sources nearby (sulphuric surroundings).
• where accumulation, generation or leaks of inammable gases has been detected.
• that are near the sea, in saline, acid or alkaline surroundings.
• Install PC-A1IO away from possible sources of electromagnetic waves.
• Respect local electrical standards.
• Use a power circuit that is not subject to peak demands.
• Ensure that there is enough free space around the PC-A1IO (see gure) so that the heat may dissipate adequately (refer to “Instal-
lation Work”).
• If you install the PC-A1IO in vertical position, install the power supply in the lower part and the temperature control outputs in the up-
per part.
8 Control support devices
PC-A1IO
TCGB0106 rev.0 - 12/2014
718