– 21 –
– 26 –
RAR-3R5
At time of
purchase
(Front)
Area airflow
(Left,
Front)
Area airflow
(Right,
Front)
Wide
airflow
Horizontal
airflow
swing
Horizontal
preferred angle
(To return to the
front angle, use
this “preferred
angle” function.)
Wide airflow ( )
• When (WIDE AIRFLOW) is displayed on the
remote controller, the horizontal air deflector is set to
the wide airflow angle.
• The fan speed is increased during the wide airflow
operation.
• Even if wide airflow has been set, the angle of horizontal air deflector may
change in the event the room temperature and humidity continue to be high
during cooling, dehumidifying or dry cool operation. The angle will change back
to wide airflow once the temperature and humidity have been lowered by the air
conditioning operation.
Adjust the horizontal airflow direction
• The angle of horizontal airflow direction is set to the front at the time of
purchase.
• Every time the button is pressed, the mode of the horizontal air deflector changes
as below.
• A short beep sounds and the angle of the horizontal air deflector changes.
About 100º
ADJUSTING THE HORIZONTAL AIRFLOW DIRECTION
– 27 –
ENGLISH
RAR-3R5
CAUTION
Do not operate long hours with cooling, dehumidifying, dry cool operation and horizontal airflow swing
operation.
Some dew may form on the horizontal air deflector and drop which may wet your furniture.
In the following cases, the swing stops even when vertical swing and horizontal swing are set.
In Heating operation In Dehumidifying operation In Dry Cool operation
• During preheat operation.
• During defrost operation.
• When the room temperature
reaches the temperature which
had been set.
• When the humidity is reached
to the humidity which has been
set.
• When the room temperature is
below 1°C.
• When the temperature is below
the temperature which has been
set and the operation is stop.
Horizontal airflow swing
• While the horizontal air deflector is swinging, the display on the remote
controller changes as below. The horizontal air deflector repeats swinging.
(Display on the remote controller and the actual movement of the horizontal
air deflector are not synchronized with each other.)
• When the air conditioner operation is stopped and then resumed, the
horizontal air deflector is set to the angle that had been set prior to its previous
swinging action.
• Even if the swing mode is set, the horizontal air deflector may stop swinging
depending on the room temperature and humidity. (Refer table below)
Horizontal angle of your preference
• To set the horizontal airflow direction to your desired angle, move the
horizontal air deflector and press the
(HORIZONTAL AIRFLOW) button
again to stop air deflector’s movement once it has reached your desired
angle.
Press the
(HORIZONTAL AIRFLOW) button again to fix your preferred
angle during horizontal airflow swing.
• Fan speed may be increased depending on the angle of the horizontal air
deflector.
• Even if the horizontal airflow direction has been adjusted to your desired
angle, the angle of horizontal air deflector may change in the event the room
temperature and humidity continue to be high during cooling, dehumidifying
or dry cool operation. The angle will change back to your desired angle once
the temperature and humidity have been lowered by the air conditioning
operation.
To Next Page
Loading...
