EasyManua.ls Logo

Hitachi RAS-25SX8 - Powerful Operation Mode; Activating Powerful Operation; Powerful Operation Scenarios

Hitachi RAS-25SX8
254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 22 –
– 28 –
RAR-3R5 RAR-3R5 RAR-3R5
3 types of timers, (OFF TIMER) (ON TIMER), (OFF TIMER) and (ON TIMER) are available. Only
one of these timers can be preset at a time.
Operation mode, temperature, humidity and fan speed, etc. must be set before setting the timer.
Press the
(OFF
TIMER) button.
How to preset the timer
For (OFF TIMER) preset........................................................................................
When
(OFF TIMER) is set, the operation stops at the preset time.
For
(ON TIMER) preset..........................................................................................
When
(ON TIMER) is set, the operation starts so that the preset temperature is reached at the preset time.
The air conditioner starts operation a maximum of 60 minutes before the preset time, depending on conditions
including room temperature and preset temperature.
How to preset the (OFF TIMER) (ON TIMER)
(For example: When setting the timer to stop operation at 10:30 p.m. and your desired temperature is reached at
7:00 a.m.)
The timer with earlier preset time will function first, based on the time at which the timer is set.
32
654
1
(OFF TIMER) blinks.
0:00 a.m. or the previous preset
time is displayed.
Press the
(TIMER)
button to set the time.
Time can be set in increments
of 10 minutes.
The time can be fast-forwarded
by continuously pressing the
button.
Press the
(PRESET)
button.
A short beep sounds and the
(OFF TIMER) is set.
(OFF TIMER) indication
stops blinking and lights up.
(TIMER SET) will be
displayed.
The
(TIMER) indicator on the
indoor unit lights up.
To change the preset time for
(OFF TIMER) , return to
procedure ① and press the
(OFF TIMER) button.
1
2
3
Time is incremented
Time is decremented
TIMER PRESET OPERATION
– 29 –
ENGLISH
RAR-3R5
Press the (CANCEL) button.
(All the preset timer will erase)
(OFF TIMER) / (ON TIMER), which are to be set using the clock function,
cannot be set during the operation set by the
(IONIZED MIST) / (AIR
PURIFYING) buttons or during the quick laundry or condensation control mode
under
(DEHUMIDIFY) operation.
As the time settings are stored in memory in the remote controller, just press
the (PRESET) button in order to use the same settings next time.
How to cancel the preset timer
RAR-3R5
RAR-3R5
RAR-3R5
Press the (ON
TIMER) button.
(ON TIMER) blinks.
6:00 a.m. or the previous preset
time is displayed.
display indicates the
sequence of
(OFF TIMER)
and
(ON TIMER) function.
Press the
(TIMER)
button to set the time.
Time can be set in increments
of 10 minutes.
The time can be fast-forwarded
by continuously pressing the
button.
Press the
(PRESET)
button.
A short beep sounds and the
(ON TIMER) is set.
(ON TIMER) indication stops
blinking and lights up.
(TIMER SET) will be
displayed.
The
(TIMER) indicator on the
indoor unit lights up.
To change the preset time
for
(ON TIMER) , return to
procedure ④ and press the
(ON TIMER) button.
4
5
6
Time is incremented
Time is decremented

Table of Contents

Other manuals for Hitachi RAS-25SX8

Related product manuals