Part name Contents of functions
LED201 (Red)
PCB2 power indication.
Normal condition: activated.
Abnormal condition: not activated.
LED202 (Yellow)
Microcomputer status indication.
Normal condition: activated.
Abnormal condition: not activated.
DSW1
• DSW1
Setting not required to be carried out.
When contact
number 1 is set to the ON position, the
electrical current detection is cancelled.
Contact number 1 must be set to the OFF position after
the electrical work is carried out.
c. Fan controller
Part name Contents of functions
LED501 (Red)
Fan controller power indication.
Normal condition: activated.
Abnormal condition: not activated.
LED202 (Yellow)
Microcomputer status indication.
Normal condition: activated.
Abnormal condition: not activated.
DSW1
• DSW1
Setting not required to be carried out.
8 Troubleshooting
260
SMGB0065 rev. 1 - 12/2010
To Next Page
Loading...
