Hitachi RAS-8FSXN - Removing the Compressor

10.5 Removing the electrical box stay
D A N G E R
• Turn OFF all the power source switches.
N O T E
• For servicing use the following tool:
- Phillips screw driver.
10.5.1
Removing the electrical box stay for RAS-(8-12)FSXN
1 Remove
the electrical box as described in the procedure
Removing the electrical box for RAS-(8-12)FSXN, see on page
295.
2 Remove the four fixing screws -A- of the electrical box stay -B-.
3 Lift the electrical box stay -B- upward. Remove the right and
left hooks that fix the electrical box stay in the direction of the
arrow.
10.5.2 Removing the electrical box stay for RAS-(14-18)FSXN
1 Remove the electrical box as described in the procedure
Removing the electrical box for RAS-(14-18)FSXN, see on
page 295.
2 Remove the four fixing screws -C- on the fan cover -D-.
3 Lift the fan cover -D- forward and remove it.
4 Remove the four fixing screws -A- of the electrical box stay -B-.
5 Lift the electrical box stay -B- upward. Remove the right and
left hooks that fix the electrical box stay in the direction of the
arrow.
A
B
A
C
D
A
B
A
C
10 Servicing
296
SMGB0065 rev. 1 - 12/2010