Part No. Description Remarks
1 Electrical box —
2 Terminal board TB1: 600 V, 50 A (RAS-(8-12)FSXN)
2 Terminal board TB1: 600 V, 80 A (RAS-(14-18)FSXN)
3 Noise filter NF1: 4LFB-22930-2F
4 Noise filter NF2: LFB-14930-3MA
5 Holder —
6 Fuse holder EF1, 2 (for the Inverter compressor)
7 Fuse holder EF11 (for the fan)
8 Fuse EF1, 2: 40 A (for the Inverter compressor)
9 Fuse EF11: 20 A (for the fan)
10 Fan controller FANM: PV092
11 Magnetic switch CMC1: Fuji electric, FC-0/SP
12 Resistor RS1, 2: 20SHT500JA187
13 Resistor
R1: 40SH, 6.3 kΩ
14 Resistor
R1: 40SH, 10.5 kΩ
15 Reactor DCL2: 3.0 mH, 10 A (for the fan)
16 Reactor DCL1: 1.0 mH, 10 A (for the inverter)
17 Diode module DM: DF50AA160
18 Transistor module IPM: 6MBP50RA120-55
19 PCB for the inverter PCB2: PV093
20 Collar —
21 Collar —
22 Bushing —
23 Spacer —
24 Spacer —
25 Radiation fin 1 —
26 Radiation fin 2 —
27 Thermistor THM: For the inverter fin
28 Capacitor CB1, 2: 450 V, 4700 µF (for the inverter)
29 Capacitor CB3: 450 V, 2700 µF (for the fan)
30 Saddle —
31 Printed circuit board PCB1: PO091
32 Spacer —
33 Spacer —
34 PCB plate —
35 Capacitors CS1, CS2
36 Noise suppressor ZNR
37 Screw —
9 Spare parts
287
SMGB0065 rev. 1 - 12/2010
9
To Next Page
Loading...
