Hitachi RAS-8FSXN - Page 32

For steel beam.
1 C-shaped clamp.
2 Antiskid clamp (bend it).
3 Nut.
4 Suspension bolt.
5 Support angle.
6 Suspension bolt.
7 Suspension bolt (W3/8 or M10).
8 I beam.
9 Suspension bolt (W3/8 or M10).
For wooden beam suspension.
1 Wooden bar (60 to 90 mm square).
2 Wooden beam.
3 Nut.
4 Square washer.
5 Nut.
6 Square washer.
7 Suspension bolt (W3/8 or M10).
For reinforcing steel.
1 150 to 160 mm..
2 Insert (100 to 150 kg).
3 Steel.
4 Suspension bolt (W3/8 or M10).
5 Concrete.
For concrete slab.
Hole-in-anchor.
1 Part A.
2 Part B.
3 Unit body.
4 Use a holesaw to make a hole.
5 Inserting.
6 Break a head portion of anchor by using a hummer.
7 Fixing.
8 Fixing bolt.
Resin capsule.
Use
the
resin capsule within a warranty period. It affects for 6
months from the manufacturing date.
1 Stiffening agent.
2 Glass.
3 Stone.
4 Epoxy resin.
5 Resin capsule.
6 Use a holesaw to make a hole.
7 Inserting (with pulse rotation).
After inserting, do not rotate or put any force until resin is hardened.
1
4
7
9
5
6
8
2
3
7
1
2
6
4
3
5
3
5
2
4
1
3 4
1
6
2
5 7 8
1
6 7
2
3
4
5
2 Unit installation
25
SMGB0065 rev. 1 - 12/2010
2