DSW1 DSW101 SW301
C A U T I O N
• The control
of the temperature is only available through the room’s thermostat or Aquastat. The Remote Control
Switch of the indoor unit cannot be touch, if it is done the unit will be outside of warranty.
• Before setting DIP switches, firstly turn OFF power source and set the position of the DIP switches. If the
switches are set without turning OFF the power source, the switches can not function.
N O T E
• The symbol “■” indicates the position of the DIP switches. Figures show setting before shipment.
4 Electrical wiring
86
SMGB0065 rev. 1 - 12/2010
To Next Page
Loading...
