2-40
SERVICING
(2.2 In-the-Ceiling Type)
(4) Remove the electrical box and the fan motor assembly can be seen.
Remove the wires fixed by the wire clamp on the fan motor fixing plate.
Phillips ScrewdriverTool
TURN OFF all power source switches.
(5) Remove four (4) M4 screws fixing the casing at the side of the casing and remove the ring of the
casing.
Phillips ScrewdriverTool
(6) Loosen the screw fixing the fan runner onto the fan motor shaft by the adjustable wrench and pull out
the fan runner.
Ring
Runner Fixing Screw
Runner
Wire Clamp
Wire
To Next Page
Loading...
