2-72
SERVICING
(2.5 2-Way Cassette Type)
2.5.7 Removing Drain-Up Mechanism
(1) Remove the air intake grille according to the item 2.5.1 “Removing Long Life Filter and Air Intake
Grille”.
(2) Remove the bell-mouth according to the item 2.5.4 “Removing Fan Runner and Fan Motor”.
(3) Remove the drain pan according to the item 2.5.8 “Removing Drain Pan”.
(4) After disconnecting the wire connector, remove two (2) fixing screws for the fixing plate for the drain-
up mechanism. Firstly support the drain-up mechanism by hand so as not to drop, remove the hose
band from the drain hose, disconnect the drain hose and then remove the drain-up mechanism.
TURN OFF all power source switches.
Phillips ScrewdriverTool
Fixing Screws
Connector
Fixing Plate
Drain-Up Mechanism
Drain Hose
Hose Band
To Next Page
Loading...
