Hitachi RPI-4.0FSG1 - Removing Electrical Box Cover; Removing Optional Air Panel

2-56
SERVICING
(2.4 4-Way Cassette Type)
2.4.3 Removing Electrical Box Cover
By opening the air intake grille, the electrical box can be seen.
Remove two (2) screws fixing the electrical box cover and remove the cover.
Phillips ScrewdriverTool
TURN OFF all power source switches.
Electrical
Box Cover
Screws
2.4.4 Removing Optional Air Panel
(1) Remove the electrical box cover according to the item 2.4.3 “Removing Electrical Box Cover”.
Disconnect the connector CN17 for louver motor on the indoor PCB.
PCB
Connector for
Louver Motor
CN17
Electrical
Box