Hitachi RPI-4.0FSG1 - Removing Automatic Louver Motor

2-65
SERVICING
(2.4 4-Way Cassette Type)
2.4.13 Removing Automatic Louver Motor
(1) Remove the optional air panel according to the item 2.4.4 “Removing Optional Air Panel”.
(2) Remove the motor cover after removing one (1) screw fixing the motor cover for the automatic louver
motor.
(3) Draw out the louver shaft from the automatic louver motor and remove the automatic louver motor
with fixing plate.
(4) Disconnect all the connectors connected to the motor.
Phillips ScrewdriverTool
Screw
Corner Cover
Optional
Air Panel
Louver Shaft
Connector
Automatic
Louver Motor
Optional
Air Panel
Screw
TURN OFF all power source switches.