2-81
SERVICING
(2.6 Wall Type)
TURN OFF all power source switches.
(8) There are three (3) catches at the inner side of the front panel. Press the catch part from the front
side and check to ensure that there is no gap between the front panel and the unit body.
NOTE:
If the gap exists between the front panel and the air outlet, it may cause air leakage and dewing may
occur at the front panel and the dew may drop.
(9) After attaching the front panel, tighten three (3) screws at the lower part of the air outlet and cover
them with the bushes.
Stoppers
No Gap
To Next Page
Loading...
