Hitachi RX2

4-55 ●Use the count function
Count conditions 2015.07.0712:45
Com=0
[Stop ]
Message name[ ]
Column1
Item2
Back
《 》
110 20
Prev.
Next
Value
Range
Update (in progress)
(unit)
1st screen
2nd screen 3rd screen
Count blocks:1/2
ＣＣＣ ＣＣ・
０００
０００
０００
０００００
００００１
− ＋
M
Manual
Startup
HOME
●A range button is not displayed at the Count conditions screen corresponding to a print item with bar code
set.
●When a jump digit was set at the right side of a count digit and jump occurred, the count of the digit at the
left of the jump digit is updated.
Count block
Count block is
displayed in a
blue frame.