Hitachi RX2

●Use the count function 4-66
Count conditions 2015.07.0712:45
Com=0
[Stop ]
Message name[ ]
Column1
Item2
Back
《 》
110 20
3rd screen
1st screen 2nd screen
Count blocks:1/1
ＣＣＣ・
Zero-suppression
Multiplier
０．３０４８・・・・
Enable
Disable
Prev.
Next
M
Manual
Startup
Apply
HOME
Edit message 2015.07.0712:45
Com=0
[Stop ]
Message name[ ]
Column1
Item2
Char.count
6/1000
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ Ｇ Ｈ Ｉ Ｊ
Backspace
Ｋ Ｌ Ｍ Ｎ Ｏ Ｐ Ｑ Ｒ Ｓ Ｔ
Dupli-
cate
Paste
Ｕ Ｖ Ｗ Ｘ Ｙ Ｚ
Space
etc. ▽
Calendar
/count
←
123‥
Sign
★◎ ‥
Logo
《 》
Delete
110 20
→
Prev.item
abcde
fghij
klmno
Nextitem
abcde
fghij
klmno
Change Change
Insert
ＣＣＣ・
Over-
write
ABC…
− ＋
Print
spec.
Print
format
M
Manual
Startup
HOME
Back
Cal.
cond.
Count
cond.
(2) Operation
Shows the operation sequence when 0.3048 is set for the count multiplier and feet → meter converter
(1 foot → 0.3048 m) is performed and the result is printed.
Input Count C .
1
Press Count cond. .
The Count conditions screen is displayed.
2
Press Previous or Next and change the objective calendar block.
3
Press 3rd screen and switch the count conditions screen.
4
Display the 3rd screen of the count condition screens and input 0.3048 at the
count multiplier.
5
Count conditions
Count conditions
screen switching
Back
Multiplier