Hitachi RX2

3-9 ●Start operation
2015.07.0712:45
M
Manual
Startup
Com=0
＝＝＝＝＝ Manual Control Menu ＝＝＝＝＝
Eject ink
Ejects ink while apply-
ing no deflection volt-
age.
Cancel
＝＝＝＝＝ Ink Jet Startup Confirmation ＝＝＝＝＝
The ink jet will be turned ON.
Solution To turn the ink jet ON, press <Ready>.
Ready
Cancel
Use this procedure when you want to eject ink from the nozzle for a purpose other than printing.
(Use only during maintenance. To print, use the Startup )
Press the Manual . The Manual Control menu appears. Press the Eject ink → Ready .
M
Manual
Ink ejection using the Manual Control Menu
● Operation can be aborted by pressing the Cancel at the “Manual Control Menu” and “Ink Jet
Startup Confirmation message”.
● If the print head cover installed, the printer will not enter the Ready state even if this operation is
performed. (Enters the Standby state)
Startup
Press Manual .
Press Eject ink .
Press Ready .