Hitachi RX2

3-11 ●Start operation
2015.07.0712:45
M
Manual
Shutdown
Com=0
＝＝＝＝＝ Manual Control Menu ＝＝＝＝＝
Ready
The deflection voltage
is applied. The printer
status becomes Ready.
No-cleaning
stop
Stops ink ejection
without cleaning.
Cancel
＝＝＝＝＝ Print confirmation ＝＝＝＝＝
The current message data will be printed.
Solution Press <OK> to print.
OK
Cancel
(2) “Standby” state → “Ready” state switching
Press the Manual . The Manual Control Menu appears.
Press the Ready → OK .
1
M
Manual
Press OK .
Press Manual .
Press Ready .