Hitachi S1 Series User Manual

S1 series standard inverter
-91-
Function
code
Name
Detailed parameter description
Default
value
P07.38
Max. temperature of present fault
0.0°C
P07.39
Input terminal state of present fault
0
P07.40
Output terminal state of present fault
0
P07.41
Running frequency of the last fault
0.00Hz
P07.42
Ramps reference frequency of the last fault
0.00Hz
P07.43
Output voltage of the last fault
0V
P07.44
Output current of the last fault
0.0A
P07.45
Bus voltage of the last fault
0.0V
P07.46
Max. temperature of the last fault
0.0°C
P07.47
Input terminal state of the last fault
0
P07.48
Output terminal state of the last fault
0
P07.49
Running frequency of the last but one fault
0.00Hz
P07.50
Ramps reference frequency of the last but one fault
0.00Hz
P07.51
Output voltage of the last but one fault
0V
P07.52
Output current of the last but one fault
0.0A
P07.53
Bus voltage of the last but one fault
0.0V
P07.54
Max. temperature of the last but one fault
0.0°C
P07.55
Input terminal state of the last but one fault
0
P07.56
Output terminal state of the last but one fault
0

Hitachi S1 Series Specifications

General

Output Frequency	0 - 400 Hz
Overload Capacity	150% for 60 seconds
Frequency	50/60 Hz
Control Method	Sensorless Vector Control
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit
Communication	RS485, Modbus RTU
Output Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC (Matches Input Voltage)
Cooling Method	Fan Cooled