Hitachi SH1 Series - Page 92

4-49
Chapter 4
For parameter configuration
[ob-10] to [ob-16] [oC-01] to[oC-28]
P1-FB Encoder Feedback Option
Pulse train input terminal setting
Code/Name
Range (unit)
Initial
value
ob-10 Pulse train
input, target function
selection (option)
00(Frequency reference)/
01(Pulse train position
reference)
00
ob-11
Pulse train input mode
selection (option)
00(90°shift pulse train)/
01(Forward/ Reverse pulse
train and direction signal)/
02(Forward pulse train and
Reverse pulse train)
01
ob-12 Pulse train
frequency scale (option)
0.05 to 200.00(kHz)
25.00
ob-13 Pulse train
frequency filter time
constant (option)
0.01 to 2.00(s)
0.10
ob-14 Pulse train
frequency bias value
(option)
-100.0 to 100.0(%)
0.0
ob-15 Pulse train
upper frequency
detection level( option)
0.0 to 100.0(%)
100.0
ob-16 Pulse train
lower frequency
detection level (option)
0.0 to 100.0(%)
0.0
・Set the above parameters when using the option
feedback.
・For more information, please contact your supplier or
local Hitachi inverter sales office.
P1-FS Optional safety operation setting
Code/Name
Range(unit)
Initial
value
oC-01 Safety option
input display selection
00(Warning: with display)/
01(Warning: without display)
00
oC-10 SS1-A
deceleration time setting
0.00 to 3600.00(s)
30.00
oC-12 SLS-A
deceleration time setting
0.00 to 3600.00(s)
30.00
oC-14 SLS-A speed
upper limit (Forward)
0.00 to 590.00(Hz)
0.00
oC-15 SLS-A speed
upper limit (Reverse)
0.00 to 590.00(Hz)
0.00
oC-16 SDI-A
deceleration time setting
0.00 to 3600.00(s)
30.00
oC-18 SDI-A direction
limit mode
00(Limit)
01(Invert)
00
oC-20 SS1-B
deceleration time setting
0.00 to 3600.00(s)
30.00
oC-22 SLS-B
deceleration time setting
0.00 to 3600.00(s)
30.00
oC-24 SLS-B speed
upper limit (Forward)
0.00 to 590.00(Hz)
0.00
oC-25 SLS-B speed
upper limit (Reverse)
0.00 to 590.00(Hz)
0.00
oC-26 SDI-B
deceleration time setting
0.00 to 3600.00(s)
30.00
oC-28
SDI-B direction limit mode
00(Limit)/01(Invert)
00
・For more information, please contact your supplier or
local Hitachi inverter sales office.
[oE-01] to [oE-33]
P1-AG Analog Input/Output Option
analog input adjustment
Code/Name
Range (unit)
Initial
value
oE-01 [Ai4]
Filter time constant
1 to 500(ms)
16
oE-03 [Ai4] Start value
0.00 to 100.00(%)
0.00
oE-04 [Ai4] End value
0.00 to 100.00(%)
100.00
oE-05 [Ai4] Start rate
0.0 to [oE-06] (%)
0.0
oE-06 [Ai4] End rate
[oE-05] to 100.0(%)
100.0
oE-07 [Ai4]
Start point selection
00(Start value[oE-03])/
01(0%)
01
oE-11 [Ai5]
Filter time constant
1 to 500(ms)
16
oE-13 [Ai5] Start value
0.00 to 100.00(%)
0.00
oE-14 [Ai5] End value
0.00 to 100.00(%)
100.00
oE-15 [Ai5] Start rate
0.0 to [oE-16] (%)
0.0
oE-16 [Ai5] End rate
[oE-15] to 100.0(%)
100.0
oE-17 [Ai5]
Start point selection
00(Start value[oE-13])/
01(0%)
01
oE-21 [Ai6]
Filter time constant
1 to 500(ms)
16
oE-23 [Ai6] Start value
-100.00 to 100.00(%)
-100.0
0
oE-24 [Ai6] End value
-100.00 to 100.00(%)
100.00
oE-25 [Ai6] Start rate
-100.0 to [oE-26] (%)
-100.0
oE-26 [Ai6] End rate
[oE-25] to 100.0(%)
100.0
oE-28 [Ai4] Voltage/Current
bias adjustment
-100.00 to 100.00(%)
0.00
oE-29 [Ai4] Voltage/Current
gain adjustment
0.00 to 200.00(%)
100.00
oE-30 [Ai5] Voltage/Current
bias adjustment
-100.00 to 100.00(%)
0.00
oE-31 [Ai5] Voltage/Current
gain adjustment
0.00 to 200.00(%)
100.00
oE-32 [Ai6] Voltage bias
adjustment
-100.00 to 100.00(%)
0.00
oE-33 [Ai6] Voltage gain
adjustment
0.00 to 200.00(%)
100.00
・Regarding the adjustment method of the analog
input/output option, contact your supplier or local Hitachi
inverter sales office for more information.