Hitachi SJ300 Series

21
A020/
A220/
A320
Multi-speed frequency setting 0.00
A021
to
A035
Multi-speed frequency settings
(for both motors)
0.00
A038 Jog frequency setting 1.00
A039 Jog stop mode
• 00 Free-run stop, jogging disabled during
motor run
• 01 Controlled deceleration, jogging disabled
during motor run
• 02 DC braking to stop, jogging disabled
during motor run
• 03 Free-run stop, jogging always enabled
• 04 Controlled deceleration, jogging always
enabled
• 05 DC braking to stop, jogging always
enabled
00
A041/
A241
Torque boost method selection
• 00 Manual torque boost
• 01 Automatic torque boost
00
A042/
A242/
A342
Manual torque boost value 1.0
A043/
A243/
A343
Manual torque boost frequency adjustment 5.0
A044/
A244/
A344
V/f characteristic curve selection
• 00 V/f constant torque
• 01 V/f variable torque
• 02 V/f free-setting curve
• 03 Sensorless vector SLV
• 04 0Hz domain SLV
• 05 Vector control with encoder feedback
00
A045 V/f gain setting 100.
A051 DC braking enable
• 00 Disable • 01 Enable
00
A052 DC braking frequency setting 0.50
A053 DC braking wait time 0.0
A054 DC braking force during deceleration 0.
A055 DC braking time for deceleration 0.0
A056 DC braking / edge or level detection for [DB]
input
01
Func.
Code
Name / Description
Default
Val ue
–FE/ FU/FR
Set
Val ue