– 14 –
2. CHECK MENU OPERATION
2.1 SELF CHECKING
Self checking of PCB using this remote controller. The self checking performs to check the remote controller
button and to clear EEPROM.
(1) Press and hold and simultaneously for at least 3 seconds
during the normal mode. The check menu will be displayed.
Select "Self Checking" from the check menu and press "OK".
(2) Select the process for "Self Checking".
* To start self check, press " ".
* To clear EEPROM, press " " and " " and " "
simultaneously. (see EEPROM clear process (14).)
(3) LCD test
Press "OK" and the screen will be swiched as shown in the picture.
SPX-WKT2 14 8/15/16 11:33 AM
To Next Page
Loading...
