Hitachi SPX-WKT2 - SAFETY PRECAUTIONS; WARNING; CAUTION

– 3 –
1. SERVICE MENU OPERATION
1 Press and hold and simultaneously
for at least 3 seconds during the normal mode.
The service menu will be displayed.
2 Select the "Service Menu" function by pressing
" " or " " and press "OK".
(" " will be displayed if the function is not
available.)
NOTE:
● The "Service Menu" functions vary depending on
which is displayed in the stop and in operation,
or model-wise.
3 Press " " (return/help) to return to the
normal mode.
NOTE:
● If the menu screen remains unchanged
for approximately 2 hours, the screen will
automatically return to the normal mode.
1.1 SERVICE MENU
Various setting functions are displayed in the service menu. This procedure shall be implemented strictly by
service personnel only. Refer to the following sections for each function.
NOTE:
: Unable to set
If the function with " " is selected from the menu, "Setting Disabled" will be displayed on the lower screen.
SPX-WKT2 3 8/15/16 11:33 AM