Hitachi SPX-WKT2 - BASIC OPERATION METHODS; Starting and Stopping Operation; Mode Selection and Temperature Adjustment

– 6 –
1.5 SHIFT CHANGE
1 Select "Shift Change" from the service menu
and press "OK". The shift change setting will
be displayed.
2 Press "
" or " " to select the operation mode.
( "COOL" or "HEAT" )
3 By pressing " " or " ", the shift value will be
changed as below.
"....+3℃ -3℃ -2℃ -1℃ 0℃
+1℃ +2℃ +3℃ -3℃..."
4 Press "OK" to fi nish the shift value setting.
The confi rmation screen will be displayed.
The shift value setting temperature for cooling and heating mode operation can be changed.
5 Select "Yes" by pressing "
" or " " and press
"OK".
The setting will be confi rmed and the screen will
return to the service menu.
6 Press "
" (return/help) to return to the
normal mode.
NOTE:
● This setting cannot use during operation.
● The shift change setting will remain unchanged
after the unit is turned off.
SPX-WKT2 6 8/15/16 11:33 AM