Hitachi SPX-WKT2 - REMOTE CONTROLLER COMPONENTS; Display Panel Indicators; Operation Buttons and Functions

– 4 –
1 Select "Display room temp" from the service
menu and press "OK".
The confi rmation screen will be displayed.
2 Select "Yes" by pressing " " or " " and press
"OK". The setting will be confi rmed and the screen
will return to the normal mode.
1 Select "Contact information" from the service
menu and press "OK". The contact information
1 will be displayed.
2 Press to change font type.
3 Press " " to select letter.
4 Press "OK" to confi rm the letter. (Max.: 28 letters)
1.3 CONTACT INFORMATION REGISTRATION
Contact information can be registered from "Contact information".
5 Select "FIN." and press "OK" (or simply press
). "Contact information 2" will be displayed.
6 Repeat (3)-(5) to register the contact information
2.
Select "FIN." and press "OK", the confi rmation
screen will be displayed.
(Also press
and the confi rmation screen will
be displayed. )
7 Select "Yes" and press "OK". The service menu
will be displayed after setting is confi rmed.
If "No" is pressed, the screen will return to (3).
1.2 DISPLAY ROOM TEMPERATURE
Room temperature(around remote controller) can be displayed.
SPX-WKT2 4 8/15/16 11:33 AM