Hitachi SPX-WKT2 - Fan Speed During Thermo off

– 8 –
1.7 FAN SPEED DURING THERMO OFF
The fan speed during thermo off in Cooling mode can be changed.
1 Select "Thermo off fan Cool." from the service
menu and press "OK".
The fan speed during themo off setting will be
displayed.
2 By pressing "
" or " ", the "Control Type" will
be changed as below.
"Default" "Changed"
3 Press "OK" to fi nish the thermo off fan control
setting. The confi rmation screen will be displayed.
Default
Fan speed during thermo off
Ultra low
Set fan speed
(When auto fan is set,
the fan speed is low.)
Changed
4 Select "Yes" by pressing " " or " " and press
"OK".
The setting will be confi rmed and the screen will
return to the service menu.
5 Press "
" (return/help) to return to the
normal mode.
NOTE:
● This setting cannot use during operation.
● The fan speed during thermo off setting will
remain unchanged after the unit is turned off.
SPX-WKT2 8 8/15/16 11:33 AM