Hitachi UX2-D160W - Page 107

Chapter 5 Creation and Setting of Print Messages
5-25
Chapter 5.
Screen to set features for barcode
Number of digits of barcode
Country code
Data
Check digit
Total number of digits
EAN-13
2
10
1
13
EAN-8
2
5
1
8
EAN Prefix
Set value
Character input
Print format
Handling of country
code
Country code is input at the head
of the data.
Set by print format without including
country code in the data.
Print format screen
Country code is not displayed.
Set the country code.
Edit message screen
For EAN-13, input 12 digits and for
EAN-8, input 7 digits, all including
the country code. However, check
digit is excluded.
For EAN-13, input 10 digits and for
EAN-8, input 5 digits, without
including the country code. However,
check digit is excluded.
(3) QR code: Error correction level
●Choose an error correction level from "M" or "Q".
QR code: Error correction level
Error correction level
Data restoration percentage
M
Approx. 15%
Q
Approx. 25%