Hitachi UX2-D160W - Selecting Print Items to be Edited

Chapter 5. Creation and Setting of Print Messages
5-12
5.5. Setting Print Format (Fixed Layout)
This section describes settings of print format (fixed layout).
5.5.1. Selecting Print Items to be Edited
There are two methods of selecting the print item to be edited.
● Selecting the print item by directly touching.
● Selecting the print item by or at the right of the screen.
Screen for specifying target print item
You can also change the editing target by
directly touching a print item.
The colored print
item is the editing
target.
Change the
target print
item.