Hitachi UX2-D160W - Creating User Pattern; Creating and Saving User Pattern

Chapter 7. Auxiliary Functions
7-18
7.3. Creating User Pattern
This section describes how to create a user pattern.
7.3.1. Creating and Saving User Pattern
This section describes the process from creation to registration of user patterns.
(1) Functions
● Creates user patterns (saved characters).
● In the [Fixed] size, horizontal and vertical dots are determined according to the dot matrix and inter-
character space.
● In the [Free] size, a pattern of any size can be created within the range of horizontal 320 dots x vertical
32 dots.
● Indicates the number of characters that can be created.
Number of user patterns that can be created
Model type
UX2-D
[Fixed] size
200 types (per dot matrix)
[Free] size
50 types
(2) Operation
Press Create user pattern from the [Setting (2/3)] menu.
The [Create user pattern] screen appears.
[Create user pattern] screen
1
Two red frames indicate
the same area.
Dot pattern
creation area
Dot matrix
Inter-character space