Chapter 6. Character Print
6-26
(c) Set user patterns as count values.
Example of [Count conditions] setup screen (3)
[Example] Define user patterns as circled numbers as shown in the table below.
If printing is performed five times each in the forward and reverse directions in reverse printing, the
same column is printed with the same number ((1) to (5)).
The count result is as shown below.
Forward (1) (2) (3) (4) (5)
Reverse (1) (2) (3) (4) (5)
● There are 48 user pattern codes that can be used as counts from 00 to 47. Be sure to start with the first
count 00.
● Numbers and user patterns can be mixed.
[Example] Count range [0000 ]
[990909 ]
To Next Page
Loading...
