Hitachi UX2-D160W - Page 279

Chapter 12. When Warning or Fault Occurs
12-3
Chapter 12.
(2) When a warning occurs
[Ink Low Warning] screen
● When Close is pressed, the warning window is closed, but the warning state is not cleared. The warning
name is displayed in the warning display area (see the figure above).
● If the warning state is cleared, the warning display is automatically closed.
(3) When an error is made or processing judgment is prompted
[Ink Jet Startup Confirmation] screen
● The details on the confirmation message are described on each operation page.
The name of the warning
message is displayed.
Message No.
The detail, cause,
and solution are
displayed.
The name of the confirmation
message is displayed.
Message No.
The detail and
solution are
displayed.