Hitachi UX2 Series - Page 19

Chapter 3 Basic Operation
3-3
Chapter 3.
Turn ON the main power switch to turn on the power.
The power is turned on, and the [HOME] screen appears.
(If the [Select login user] screen appears, see the next page.)
If the power is not turned on, it may have been shut down with the STOP switch last time. Press the ON
switch for about two seconds to turn on the power.
* To turn on the power again, ensure that the operating status indicator lamps are off.
● You can check the print description, count value, and calendar character contents on the [HOME]
screen.
2
Operating status
indicator lamps
Displays "Ready",
"Fault" and "Warning".
ON/STOP switch
Starts or stops the unit
with the main power on.
Main power switch
Turns the unit ON and
OFF.