Hitachi UX2 Series User Manual

Chapter 4. Ink and Makeup Replenishment
4-4
Hold the IC tag mark of the label on the cartridge bottle over the RFID reader of the printer to read the
ink ID.
NOTE
● If there is ink remaining in the cartridge bottle even when the bottle is replaceable, do not
replace it but contact your nearest local distributor because some part may be broken.
* If there is no reaction when you hold the cartridge bottle over the reader of the printer, the IC tag of
the cartridge may be damaged.
In this case, you can manually input the ink ID from the IJP screen.
(Steps -1 and -2)
● If the ink ID is read by the IJ printer, steps -1 and -2 are not necessary.
2
2
2
2
2
RFID reader area
30 mm or less
IC tag mark

Hitachi UX2 Series Specifications

General

Brand	Hitachi
Model	UX2 Series
Category	Printer
Language	English