Hitachi UX2 Series User Manual

Chapter 4. Ink and Makeup Replenishment
4-13
Chapter 4.
Hold the IC tag mark of the label on the cartridge bottle over the RFID reader of the printer to read the
makeup ID.
NOTE
● If there is makeup remaining in the cartridge bottle even when the bottle is replaceable, do not
replace it but contact your nearest local distributor.
Some part may be broken.
* If a makeup cartridge bottle containing makeup less than half of the bottle is used, [Cartridge
replacement error] may appear on the screen. In that case, select the volume of the new makeup
cartridge bottle according to the guidance displayed on the screen.
* If there is no reaction when you hold the cartridge bottle over the reader of the printer, the IC tag of
the cartridge may be damaged.
In this case, you can manually input the makeup ID from the IJP screen.
(Steps -1 and -2)
● If the ink ID is read by the IJ printer, steps -1 and -2 are not necessary.
2
2
2
2
2
IC tag mark
RFID reader area
30 mm or less

Hitachi UX2 Series Specifications

General

Brand	Hitachi
Model	UX2 Series
Category	Printer
Language	English