Hitachi UX2 User Manual (English)

Other manuals for Hitachi UX2

Instruction Manual300 pages

Technical Manual184 pages

User Manual69 pages

Questions and Answers:

G
gadamsAug 5, 2025
How to fix Hitachi Printer if the power does not turn ON?
- S
  Suzanne HamiltonAug 5, 2025
  If the power does not turn ON when you press the ON switch on your Hitachi Printer, first, turn ON the main power switch. If that doesn't work, turn OFF the main power switch, ensure the power outlet is active, and then connect the power plug securely. As an alternative, make sure the status indicator lamp is OFF before pressing the ON switch. Turn the main power switch OFF and then ON again after ten seconds, then try pressing the ON switch for about two seconds.
E
Edward SavageAug 9, 2025
What to do if Hitachi Printer does not become ready for printing when STARTUP is pressed?
- C
  Corey WilliamsAug 9, 2025
  If your Hitachi Printer unit doesn't become ready for printing even after pressing STARTUP, stop the ink ejection by pressing Stop. Then, consult the Technical Manual section "5.5. Stream alignment" to correct the problem. Alternatively, see section "1.2.3. Print Head Cleaning" to clean the print head.
A
alyssa24Aug 15, 2025
What to do if remote operation does not work on Hitachi Printer?
- J
  Jason BennettAug 15, 2025
  If the remote operation on your Hitachi Printer isn't working even when the signal is input, close the window and display the [HOME] screen. Then, input the signal again.
K
Kristen KennedyAug 20, 2025
Why does after-image of characters remain on the screen of Hitachi Printer?
- B
  Bradley FernandezAug 20, 2025
  If you're seeing an after-image of characters remaining on the screen of your Hitachi Printer, it's due to the characteristics of the LCD panel. When the same pattern is displayed for an extended period, this after-image may appear, but it should disappear over time.
N
nicolefriedmanAug 26, 2025
How to correct the printed calendar time on Hitachi Printer?
- S
  Sandra Davis DDSAug 26, 2025
  If the printed calendar time is incorrect on your Hitachi Printer, set the current date and time as the calendar time. Refer to section "9.2. Setting Date and Time."
J
John WeberAug 29, 2025
What to do if RFID cannot be read by Hitachi Printer?
- D
  danielsanthonyAug 29, 2025
  If the RFID cannot be read by your Hitachi Printer, the tag may be broken. Manually input the ID according to "Chapter 8. Ink and Makeup Replenishment."