OPERATOR'S STATION
1-134
Opening/Closing and Removing Cab Inside
Window
d
WARNING:
Open, close or remove the upper front cab window,
overhead window, cab door window or lower front
window only after lowering the front attachment to
the ground and pulling up pilot control shut-off lever
(1) to the LOCK position. Failure to do so may allow
the machine to move unexpectedly if a control lever
or pedal is mistakenly touched with a part of the
body, possibly resulting in personal injury or death.
Park the machine on a level surface and stop the
engine before opening and closing the upper front
window.
When opening the upper front window, hold the
window by hands, hold it until the upper front
window is locked.
When closing the upper front window, it may
accidentally fall under its own weight. Hold the
upper front window with both hands until it is
completely closed. The window stops once before
closing completely. Do not operate the machine
when the window is in this position. The upper front
window is not locked in this position, there is a
possibility that the window may drop suddenly.
1
MDCN-01-008
To Next Page
Loading...
Need help?
General
