OPERATING THE ENGINE
3-8
MDCD-01-026
5
4
f
NOTE: When the key switch is turned ON, maintenance
notification (4) for the item whose maintenance interval
has expired displays for 10 seconds. Push Return to Previous
Screen switch (5) or turn the pilot control shut-off lever to the
UNLOCK position while the rear view camera is enabled to
delete the notification.
7. The Basic Screen will be displayed on the monitor.
The machine will automatically check if preheating is
required or not. When preheating is required, preheat
indicator (6) is lit for automatically.
f
NOTE: In case, preheat indicator (6) does not come ON,
preheating is not required. Follow the "Starting the Engine in
Ordinary Temperature" section.
8. As soon as preheat indicator (6) goes OFF, turn key
switch to START position to rotate the starter.
IMPORTANT: Never operate the starter for more than 10
seconds at a time. If engine fails to start, return key
switch to OFF. Wait for more than 30 seconds, then
try again. Failure to do so may cause damage to the
starter and/or discharging the batteries.
Basic Screen
6
MDC1-01-042
MDC1-01-213EN
To Next Page
Loading...
Need help?
General
