MAINTENANCE
7-18
I. Miscellaneous
Parts Quantity
Interval (hours)
Page
8 50 100 250 500 1000 2000 4500
1. Check and Replace Bucket Teeth − 7-113
2. Change Bucket − As required 7-115
3. Convert Bucket Connection Into Face Shovel − As required 7-116
4. Adjust Bucket Linkage 1 As required 7-117
5. Remove Travel Levers 2 As required 7-118
6. Check and Replace Seat Belt 1 Every 3 years 7-118
7. Check Windshield Washer Fluid Level 1 As required 7-119
8. Check Track Sag 2 7-120
9.
Clean and Replace Air
Conditioner Filter
Circulating Air
Filter
Clean 1 7-125
Replace 1 After cleaning 6 times or so 7-125
Fresh Air Filter
Clean 1 7-125
Replace 1 After cleaning 6 times or so 7-125
10. Check Air Conditioner − 7-128
11. Clean Cab Floor − As required 7-130
12. Retighten Cylinder Head Bolt − *As required 7-131
13. Inspect and Adjust Valve Clearance − * 7-131
14. Measure Engine Compression Pressure − * 7-131
15. Check Starter and Alternator − * 7-131
16. Check and Replace EGR Device − *As required 7-131
17. EGR Cooler Cleaning − * 7-131
18. Check Turbo Charger − * 7-131
19. Check and Clean Injector − * 7-132
20. Check Gas Damper − *As required 7-132
21.
Tightening and Retightening Torque of Nuts and
Bolts
−
7-132
: Maintenance required only during first time check.
f
NOTE: * Contact your authorized dealer for maintenance. Instruction plate for the recommended grease and lubricants is
affixed to the reverse side of the front right cover.
To Next Page
Loading...
Need help?
General
