Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden-9507018) -
2016 - crc - 11/19/15
Driving and Operating 133
Parking Brake
Applying the parking brake:
1. Pull the lever straight up,
without pressing the release
button.
Releasing the parking brake:
1. Pull the lever slightly upwards.
2. Push in the release button on
the top of the lever and lower
the lever all the way down.
{
Warning
Never drive the vehicle with the
parking brake applied.
Brake and Clutch System Warning
Light 0 59.
Brake Assist
If the brake pedal is pressed quickly
and forcefully, maximum brake force
is automatically applied (full
braking).
Maintain steady pressure on the
brake pedal for as long as full
braking is required. Maximum brake
force is automatically reduced when
the brake pedal is released.
Hill Start Assist (HSA)
The system helps prevent
unintended movement when driving
away on inclines.
When releasing the foot brake after
stopping on an incline, the brakes
remain on for a further two seconds.
The brakes release automatically as
soon as the vehicle begins to
accelerate.
To Next Page
Loading...
Need help?
General
